Saeco Coffee Makers DEU001H, DEU001S operation manual Installation And Handling, Disposal

16

INSTALLATION AND HANDLING - DISPOSAL

INSTALLATION AND HANDLING

• Keep the packing for possible future use; in any event if the packing is disposed	O
of, it must be done so observing the standards in force in the country in which
the dehumidifier is installed.

•When handling and transporting the unit, it must be kept in an upright position (fig.O); make sure that the water collection tray is empty.

•Do not use the handle situated at the back to lift the dehumidifier (Fig.P); this handle has been designed to facilitate moving the dehumidifier while it rests on the floor.

•	Maintain the proper space around the unit as indicated in (Fig.Q) for installation;	UP
	move curtains and/or other obstacles that may interfere with smooth airflow.
•	The dehumidifier must be installed on a flat and level surface that is capable of	P
	bearing its full weight (Fig.R).
	If the equipment is tilted and/or laid down, the water accumulated by the
	dehumidification process may overflow, causing damage.

•The dehumidifier may be wall-mounted in an upright position (fig.S); for this type of installation make sure that the wall is suitable to take the full weight (see technical data). Use 2 appropriately shaped and sized dowels for this purpose (see example in fig.T).

The manufacturer declines all implicit and explicit liabilities with regard to
damage to objects and/or injury to persons that may occur due to an	Q	Measurements
incorrect installation or use of the dehumidifier.
		in mm

DISPOSAL

A dehumidifier that will no longer be used must be immediately rendered inoperable. Unplug the unit and cut the power cord. The unit should then be handed over to an authorised collection center for its disposal in compliance with the rules in force in the country of installation.

R

V	U	T	(not supplied)		S
			Ø	5	m a x
				2 5	m a x
	X	X
			6	m in	÷ 1 5 m a x
			Measurements
	X= 235 mm		in mm