Saeco Coffee Makers VIENNADELUXE manual Problems - Causes - Remedies

Problems - Causes - Remedies

Problems Causes Remedies

39

The machine does not turn on	The machine not getting power				Connect the machine to an
					operating electrical outlet
	The service door is open				Close the door
The coffee cycle does not start	Brew group		not	positioned	Fit or lock the brew group in
The red warning light (26) is	properly or not locked in place				place
flashing:
	Drip	tray	not	positioned	Fit the drip tray correctly into
	properly				place
	Dump	box	not	positioned	Fit the dump box correctly into place
	properly
The coffee cycle does not start	The coffee container is empty				Refill the coffee container and
The red warning light (26) goes					restart the dispensing cycle
on:
	The water container is empty				Refill the water container, pri-
					me the machine and restart the
					dispensing cycle
The coffee is not hot enough	The cups are cold				Pre-heat the cups
No hot water or steam is	The opening of the steam tube				Clean the opening of the steam
dispensed	is clogged				tube with a pin
No coffee is dispensed	There is no water				Refill the water container and
					reload the circuit (Par.4.4.)
	Brew group is dirty				Clean the unit (Par.11)
	Machine not primed				Prime the machine (Par.4.4)
Coffee drips out slowly	Coffee ground too finely				Adjust grind setting to a coarser
					(higher number) grind.
	Machine not primed				Prime the machine (Par.4.4)
	Brew group dirty				Clean the brew group (Par.11)
	The blend is not suitable or the				Change the coffee blend or
	coffee is not freshly roasted or				adjust the grinder as directed
	is ground too finely.				in par.5 (Reduce the dose –
					Optional)