BASIC OPTIONS
5.2 Storing phone numbers
The Marmitek SC9000 console is equipped with a telephone dialler. In the case of an alarm up to 6 telephone numbers can be dialled. All persons called will be able to listen to the message you have recorded (5.3). The message needs to be confirmed by the person answering the phone by pressing a 0 on their phone. The telephone dialler then knows the next number does not need to be called.
You are not allowed to use emergency numbers, i.e. the police, unless you have been granted special permission.
First make a list with the phone numbers you want to enter, in the order they need to be dialled. If you have connected the console via an ISDN phone system, you may need to add a 0 in front of the telephone number to get an external line.
1.To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2.Enter your
3.When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4.Use the menu buttons / to go to menu item 3. PHONE NUMS. Press OK to select this menu item. You can also go to this menu item directly by pressing a 3 on the number pad.
5.Use the menu buttons / to go to the memory space where you want to enter a telephone number (PHONE 1, PHONE 2 … PHONE 6).
6.Press OK when you have arrived at the memory space. After pressing OK at PHONE 1, the display will read SET PH 1.
7.Enter the telephone number. Press the OFF button for a dial pause (use a dial pause between the extra 0 and the telephone number when the console is connected to an ISDN phone system. A small letter ‘P’ can now be seen on the display).
8.Press OK. You will now automatically go to the next memory space.
9.Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the menu. If you choose No, you go back to the main menu.
☺If you press CLEAR while entering a telephone number, the number entered will be deleted.
☺If you program less than 6 numbers, the console will try to contact you at these numbers several times in case of an alarm. As soon as the call is confirmed, the console will stop dialling out.
5.3Recording your own message
You can record your own message that will be used by the telephone dialler. The message can be up to 12 seconds long. Make sure the message is not too short, because this will cause a long silence when the message is played.
☺Example: This is the security system of ...... Press 0 after this message to hear what is going on in my house. Please take the steps that we agreed.
1.To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2.Enter your
3.When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4.Use the menu buttons / to go to menu item 4. MESSAGE. Press OK to select this menu item. You can also go to this menu item directly by pressing a 4 on the number pad.
5.Press 1 for RECORD.
6.The display will now read ‘PLEASE WAIT’.
7.When the display reads ‘SPEAK NOW’ you can record your message (max. 12 seconds). The distance to the microphone should be no more than 30 cm.
8.After recording, wait until the RECORD/REPLAY menu comes up again.
18 | MARMITEK |