6
10
7

BASIC OPTIONS

•You can use up to 16 wireless remote controls.

•2 inputs for wired sensors.

•Silent alarm possible (no siren).

•By calling the system, you can control the system remotely and check the status. The TotalGuard also lets you switch on the lights.

•Prevention: Your lights are switched on and off in such a way that it appears as if you are home.

1.2 Signal range

The sensors have an open field range of 100 m. Walls, ceilings and other large object will influence the range. The range depends on your personal living conditions, but is usually between 15 and 30 m.

One other factor that can decrease the range is the presence of other distorting high-frequency signals on the same frequency (433MHz). RF wireless headphones and wireless speakers can influence the range. They cannot cause a false alarm. Wireless phones or networks do not influence the system.

2.The security console

(1) Display.

(2)ARM HOME button Alarm function for when

you are at home. All

Door/Window Sensors are8 activated, but the Motion

Detectors remain unarmed.

(3)ARM AWAY button

Full alarm. All sensors are activated.

(4)ARMED Indicator

Lights up when the alarm is switched on.

(5)BATTERY Indicator

Lights up when the back-

 

up batteries are empty or

 

 

 

 

 

 

 

 

not installed.

4 5

1

2 3

18 11 9

16

 

13

(6)

Telephone connection.

 

(7)

AC adapter connection.

 

 

 

14

15

17

12

(8)

Wired inputs.

 

 

 

 

 

 

 

 

 

 

(9)Tamper contact.

(10)Emergency battery compartment.

(11)Console buttons.

(12)Menu Start  - Call up the menu or step up in the menu.

(13)Menu Start  - Call up the menu or step down in the menu.

(14)ON - Switch on a Marmitek X-10 Module (see 7.7).

(15)OFF - Switch off a Marmitek X-10 Module (see 7.7).

(16)OK - Confirm setting.

(17)Clear/bypass - Clear the setting, go up one level in the menu, Bypass function for switching of a sensor.

(18)Built-in microphone.

SAFEGUARD / TOTALGUARD

7