8.5 Selecting silent mode

If you want the ringing tone of your phone to be replaced by the vibrator and the beeps to be suppressed (except for the alarm tone), tick the box and validate by pressing OK.

This mode is indicated by the symbol on the screen saver.

8.6 Setting the beeps

Different controls are available:

Setting the keypad tones

Select the tone required using the scrolling arrows and validate (press ).

Setting the network tone

If you want your phone to give a warning beep when it locates a network on which it can communicate:

Tick the box and validate by pressing OK.

Silent mode is automatically deactivated when the hands free kit car is connected as well as when the phone is switched on/off.

You can select the tones produced by your keypad: Beep, DTMF (musical keys) or non active tones (in this last case, when you press your keyboard, it does not make a noise).

38

Setting the low battery tone

If you want your phone to give a warning beep when your battery is low:

Tick the box and validate by pressing OK.

8.7 Deleting DTMF tones

(Depending on model)

You can delete the emission of DTMF tones during a call. You can thus make a call, in a comfortable and discreet way for you caller.

To be discreet, clear the selection from the box. Validate by pressing OK.

8. Ringing tones and vibrator

MY_304X_EN-08.p65

38

28/12/01, 11:28

Page 39
Image 39
Sagem MY 302X, MY 304X manual Setting the beeps, Deleting Dtmf tones, Setting the low battery tone