Samson AirLine | Guided Tour - UM1 Receiver |
ENGLISH | 8 | 9 | 10 | 11 | ||
| DC INPUT | OUT UNBAL |
| LEVEL | ||
|
|
|
| 30 | 20 | 10 |
6:Battery holder - Insert a standard
7:Plastic screwdriver - Specially designed for use in adjusting the UM1 Squelch Level control (see #4 on the previous page). See the “Setting Up and Using the
AirLine System” section on page 16 in this manual for more information.
8:Antennas (A and B) - The antenna mountings allow full rotation for optimum placement. In normal operation, both antennas should be placed in a vertical position. Both antennas can be folded inward for convenience when transporting the UM1. See the “Setting Up and Using the AirLine” section on page 16 in this manual for more information.
9:DC input - This jack will accept a DC input voltage of 6 - 13 volts (inner connection [tip] positive, outer connection [sleeve] ground) from your video camera, if available. Connect an optional Samson AC300R adapter here to charge a rechargeable
10:Unbalanced output* - Use this unbalanced (1K Ohm max.) 1/8" (3.5 mm)
11:Audio Output Level switch - Sets the audio output level of both the balanced and unbalanced outputs (see #10 above and #14
10