12
ENG
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1If the television is in Standby mode, press the POWER( ) button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for
a little while and then Language menu is automatically
displayed.
2Select the appropriate language by pressing the or
button. Press the MENU button to enter the language.
Result: The message Ant. Input : Check is displayed.
➣If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3Make sure that the antenna is connected to the TV. Press the
-
or
+button.
Result: The Auto store menu is displayed with Areais
selected.
4Select your area by pressing the
-
or +button. To search the
channels, select Search by pressing the or button, and
then press the
-
or +button. Press the MENU button to stop the
search.
Result: The Time menu is displayed with Clock is selected.
➣Refer to “Storing Channels Automatically” on page 14.
5Press the
-
or +button to move to the hour or minute. Set the
hour or minute by pressing the or button.
➣Refer to “Setting and Displaying the Current Time” on page
30.
6When you have finished, press the MENU button.
Result: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.
7If you want to reset this feature...
1Press the MENU button.
2Press the or button to select Function, and then
press the
-
or +button.
3Select Plug & Play by pressing the or button, and
then press the
-
or +button.
Result: This feature starts with the message Plug & Play
is displayed.
Plug & Play Feature
Plug & Play
Ant. Input : Check
Select Exit
Select Adjust Exit
Time
Clock : -- : -- am
Timer : Off
Select Enter Exit
Function
Language : English
Time
❿❿
Plug & Play
❿❿
Blue screen : On
Demonstration
❿❿
ENJOY YOUR WATCHING
Select Adjust Exit
Auto store
Area : ASIA W/EUROPE
Search : -/+