Adjusting the LCD Display
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.
Fine
MENU → 
→ ENTER → [Picture] → 
→ 
→
→
→ ENTER → [Image Lock] → 
→ ENTER
→[Fine]
→
, 
→ ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).
H-Position
MENU → 
→ ENTER → [Picture] → 
→ 
→
→
→ ENTER → [Image Lock] → 
→ 
→ ENTER →
→ 
, 
→ ENTER
Adjusts the screen location horizontally.
MENU → 
→ ENTER → [Picture] → 
→ 
→
→
→ ENTER → [Image Lock] → 
→ 
→ 
→ENTER→
→
, 
→ ENTER
Adjusts the screen location vertically.
Auto Adjustment 
MENU → 
→ ENTER → [Picture] → 
→ 
→ 
→
→
→ ENTER → [Auto Adjustment ]
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.
(Available in PC mode only)
Note
The direct button on the remote control is the 'AUTO' button.
Signal Balance 
This is used to make up for the weak RGB signal transmitted by a long signal cable.
MENU → 
→ ENTER → [Picture] → 
→ 
→ 
→
→
→
→ ENTER → [Signal Balance]
