Samsung 400Pn, 400P manual Front

Front

1.	MENU	6.	PIP
2.	Navigate button (Up-Down button)	7.	Power button
3.	Adjust button (Left-Right button)/	8.	Power indicator
	Volume button
4.	ENTER	9.	Remote Control Sensor

5.SOURCE

1.MENU

Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu.

2.Navigate buttons (Up-Down button)

Moves from one menu item to another vertically or adjusts selected menu values.

3.Adjust buttons (Left-Right button) / Volume buttons

Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume.

4.ENTER

Activates a highlighted menu item.

5.SOURCE

Switches from PC mode to Video mode.

Changing the source is allowed only in external devices that are connected to the monitor at the time.

To switch Screen modes:

[PC] [BNC] [DVI] [AV] [S-VIDEO] [Component] >>Click here to see an animation clip

6.PIP

Push the PIP button to turn PIP screen On/Off.

More than one PIP couldn't be overlapped on screen as BNC and the component use the same terminal.

>>Click here to see an animation clip

• PC / DVI

: AV / S-Video / Component Mode

• BNC

: AV / S-Video Mode

• AV / S-Video

: PC / BNC / DVI Mode

• Component

: PC / DVI Mode

7.Power button

Use this button to turn the monitor on and off.

8.Power indicator

Power Indicator shows PowerSaver mode by green blinking.

9.Remote Control Sensor

Aim the remote control towards this spot on the Monitor.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended