Samsung 400Pn, 400P manual Connecting a Camcorder, AV AUDIO IN L-AUDIO-R on the Monitor

1.Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R]on the Monitor and the AUDIO OUT jacks on the DVD player.

2.Connect a Component cable between the BNC/COMPONENT IN - PR, Y, PB port on the Monitor and the PR, Y, PB jacks on the DVD player.

Component cable is optional.

3.Select Component that is connected to a DVD player using the Source button on the monitor's front or remote control.

4.Then, start the DVD Player with a DVD disc inserted.

For an explanation of Component video, see your DVD player owner's manual.

4. Connecting a Camcorder

1.Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.

Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the

AV AUDIO IN [L-AUDIO-R] on the Monitor.

2.Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the Monitor.

3.Select AV that is connected to a Camcorder using the Source button on the monitor's front or remote control.

4.Then, start the Camcorders with a tape inserted.

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.)

If your camcorder is stereo, you need to connect a set of two cables.