Samsung 400Pn, 400P Main Icons, Select Button, Remocon, Info Grid, Safety Lock, Display Selection

Main Icons	Select Button
Remocon	Info Grid
Safety Lock	Display Selection
Port Selection	Control Tools

1.Use the main icons to switch into each screen.

2.Allows you to enable or disable the remote control signal receiving function of the display unit.

3.The setting for the PC Serial Port can change. The original value is COM1.

4.Sets the Lock Function.

5.Click Select all or Clear to select or clear all displays.

6.Use Grid to view brief information on selected display.

7.Select a display from Display Selection.

8.Use Control Tools to control displays.

The remote control Enable/Disable function operates whether or not the power is On/Off, and this applies to all displays connected to the displays connected to the MDC However, regardless of the status at the time the MDC is shut down, the remote control signal receiving function of all displays is initialized to Enable when the MDC is closed.

2. Beginning - Port Setting