Samsung 410 Series user manual Upgrading the Software, SW Upgrade, Yes No

Upgrading the Software

Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at

1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port.

1Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the rear of the TV.

2Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

3Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.

4Press the ▲ or ▼ button to select USB, then press the ENTER button.

The message Scanning for USB... It may take up to 30 seconds is displayed.

5If the firmware on the USB is properly recognized, the message Upgrade version xxxx to version xxxx The system would be reset after upgrade. is displayed.

Press the ◄ or ► button to select Yes, then press the ENTER button. The upgrade starts.

Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied.

The TV will shut off and turn on automatically after completing the firmware upgrade.

Please check the firmware version after the upgrades are complete.

When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

	TV Rear Panel
	USB Drive
T V	Setup

▲More

	Energy Saving		: Off	►
	SW Upgrade			►
	Move		Enter	Return
T V		SW Upgrade

USB►

Enter Return

SW Upgrade

Scanning for USB...

It may take up to 30 seconds

SW Upgrade

Upgrade version XXXX to version XXXX? The system would be reset after upgrade.

Yes No

English - 52