zLarge
zSmall
zDouble1
zDouble2
zDouble3
2. Source
When selecting sources to be output to PIP, the relevant source will be applied to PIP.
When trying to change a source where PIP cannot be applied or the combination of
Main/Sub is incompatible, a warning message will appear on the monitor.
zPC
zBNC
zDVI
zAV
zS-Video
zComponent
Setting
1. Audio
Adjust the Bass, Treble and Balance, and set Main/Sub for the Sound Select of Dolby
Virtual ON/OFF, BBE ON/OFF and PIP. In the course of making adjustments, changes
appear as OSDs on the monitor screen.
zBass
zTreble
zBalance
zDolby Virtual
zBBE
zSound Select
2. Image Lock
Coarse, Fine, and select Position.
zCoarse
zFine
zPosition
zAuto Adjustment
Maintenance
1. Lamp Control
You can control the intensity of the lamp.
( Auto/Manual is available. When Auto is running, Manual is off; and when Manual is
running, Auto is off. )
In Auto mode, the lamp is adjusted to the previously set value at the set time.
In Manual, the previous value is maintained.
zAuto
zHour
zMinute
zAM/PM
zValue