Using the Software

Ethernet Mode

The Ethernet Mode field configures the Ethernet mode of the Portal. The options are:

Auto

10 Mbps Full-Duplex

100 Mbps Full-Duplex

Connection Management

The Connection Management tab allows enabling or disabling connection management, and to spec- ify the IP address of the connection manager. In a managed connection, an external Connection Managerment Server communicates with and can remotely control and configure the device. Addi- tionally, the connection manager can locate an appropriate peer for the device to connect to, and initiate the connection. Connection management can greatly simplify the administration effort for a large, complex system.

Enable Connection Management

If the Enable Connection Management option is enabled, the device can be configured and con- trolled by an external connection manager.

Identify Connection Manager By

The Identify Connection Manager By selector allows the administrator to choose whether the connection manager is identified by IP address, or by Fully Qualified Domain Name (FQDN). If connection management is disabled, this field is not required and is not editable.

Enable Event Log Notification

The Enable Event Log Notification field enables event notification from the PC-over-IP Host and Portal devices to the connection management server.

Enable Diagnostic Log

The Enable Diagnostic Log field allows enabling diagnostic event log messages to log normal Connection Management Interface (CMI) server and client operation.

Page 37
Image 37
Samsung 930ND user manual Connection Management