4. Troubleshooting
4-5-2. Service Function Specifications
Checking the Code Version
1.Check the MCU code version and checksum after entering SVC Mode.
2.Entering SVC Mode
-Adjust the Brightness and Contrast values to 0.
-Hold down the Enter button for five (5) seconds.
-The SVC Function OSD is displayed.
-To exit the SVC Function, turn the power off.
3.Safe Mode
-When the input signal is higher than the supported frequency of the product, safe mode gives users some time (one minute) to change the video card settings to the Recommended Mode settings.
Panel information
Select the Auto Auto option
Select the PixelShift option.
Country
Scaler Vender
Micom version
Micom checksum
Service Mode (Moving around)
1. Press the + button to move to other items.
