The teletext pages are organized according to six categories:
Part Contents
ASelected page number.
BBroadcasting channel identity.
CCurrent page number or search indications.
DDate and time.
EText.
FStatus information.
FASTEXT information.
NTeletext information is often divided between several pages displayed in sequence, which can be accessed by:
-Entering the page number
-Selecting a title in a list
-Selecting a coloured heading (FASTEXT system)
OPress the TV button to exit from the teletext display.
TV VCR DVD STB
Setting Up Your Remote Control
After the television has been set up properly, your remote control can operate in different modes: TV, VCR, DVD,
NThe remote control might not be compatible with all DVD Players, VCRs,
Setting Up the Remote to Operate Your VCR, DVD, STB and Cable Box
1.Turn off your VCR, DVD, STB and Cable Box.
2.Press the MODE button and make sure that the VCR, DVD and STB LED is illuminated.
3.Press the SET button on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the VCR, DVD, STB or Cable Box code listed on pages 61~62 of this manual for your brand of VCR, DVD, STB or Cable Box. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5.Press the POWER button on the remote control. Your VCR, DVD, STB or Cable Box should turn on if your remote is set up correctly. If your VCR, DVD, STB or Cable Box does not turn on after set up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of VCR, DVD, STB or Cable Box.
If no other codes are listed, try each VCR, DVD, STB or Cable Box code, 000 through 080.
N When your remote control is in VCR, DVD or STB mode, the volume buttons still control your TV’s volume
TV VCR DVD STB
SET RESET
English - 60
