28
Flash( ) / Left button
When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor
shift to the left tab.
When the menu is not displayed on the LCD monitor, the LEFT button operates as the
FLASH( ) button.
[ Selecting the Auto flash ]
Selecting the flash mode
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the Flash button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD
monitor. Use the correct flash to suit the environment.
Flash range
ISO WIDE TELE
AUTO 0.25m ~ 3.0m 0.8m ~ 2.0m
Unit : m
Using the flash frequently will reduce the life of the batteries.
Under normal operating conditions the charging time for the flash is normally within 5
seconds. If the batteries are weak, the charging time will be longer.
During the movie clip mode, the flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or highly reflective.
The LCD monitor is turned off for a while after using the flash to recharge it.
INFORMATION