Samsung AF28HVSDADFNMG manual How to connect your extended power cables, FfItems to prepare

Electrical work

How to connect your extended power cables

ffItems to prepare

Tools	Crimping plier	Connection sleeve (mm)	Insulation tape	Contraction tube (mm)
Spec	MH-14	20xØ6.5(HxOD)	Width 19mm	70xØ8.0(LxOD)
Shape

1.As shown in the figure, peel off the shields from the rubber/wire of the power cable.

-- Peel off 20mm of the wire shields of the tube installed already.

Power cable(provided by us)		(Unit: mm)
20	20	20
		60
	120
180

20

Power cable (provided by us)

2. Insert both sides of core wire of the power cable into the connection sleeve. ffMethod 1

Push the core wire in to the sleeve from both sides.

Connection sleeve

• After peeling off the tube wire, you must insert a contraction tube.

CAUTION

ffMethod 2

Twist the wire cores together and push it in to the sleeve.

Connection sleeve

3.Using a compressor, compress the two points and flip it over and compress another two points in the same location. -- The compression dimension should be 8.0.

-- After compressing it, pull both sides of the wire to make sure it is firmly pressed.

Comp. dim.	ffMethod 1	ffMethod 2
	Compress it 4 times	Compress it 4 times

5mm

5mm

4. Wrap it with the insulation tape twice and position your contraction tube in the middle of the insulation tape.

ffMethod 1	ffMethod 2
Insulation tape	Insulation tape
40mm	35mm

48

사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_04773A-00.indd 48 2014-09-11 오후 1:16:18