Indoor/outdoor unit installation diagram
ffWhen installing the outdoor unit near seashore, make sure it is not directly exposed to sea breeze. If you can not find a adequate place without direct see breeze, protection wall should be constructed.
ffInstall the outdoor unit in a place (such as near buildings etc.) where it can be prevented from sea breeze which can damage the outdoor unit.
Sea breeze | Sea breeze | Outdoor |
unit | ||
| Outdoor unit |
|
Sea | Sea |
|
fIfyou cannot avoid installing the outdoor unit near seashore, make sure to construct protection wall to protect the outdoor unit from sea breeze.
Protection wall | Outdoor | |
unit | ||
|
Sea breeze 
Sea
•Protection wall should be constructed with a solid material that can block the sea breeze and the height and width of the wall should be 1.5 times larger than the size of the outdoor unit. Also, secure over 700 mm between the protection wall and the outdoor unit for exhausted air to ventilate.
ffInstall the outdoor unit in a place where water can drain smoothly.
❋❋If you cannot find a place satisfying above conditions, please contact manufacturer. Make sure to clean the sea water and the dust on the outdoor unit heat exchanger and spread corrosion inhibitor on heat exchanger. (At least one time per one year.)
40
사우디,인도,나이지리아향 FAC MEMORY |