Wireless Network

Connections

Connecting to the Network

Wireless Network

Broadband service

Wireless IP sharer

PC

Networking with PC for AllShare function (See pages 61~62)

You can connect to network with a Wireless IP sharer. A wireless AP/IP router is required to make a wireless network connection. Set the network options. (See page 39)

NOTE

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)

Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1)Authentication Mode : WEP, WPAPSK, WPA2PSK

2)Encryption Type : WEP, TKIP, AES

For the AllShare function, a PC must be connected in the network as shown in the figure.

Connecting the FM Antenna

FM Antenna (supplied)

FM ANT

Broadband serviceConnecting the FM AntennaFM Antenna (supplied) WIRELESS

iPod

DIGIRA AODIO I

OPTICA

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.

28 English

Page 28
Image 28
Samsung AH68-02290S Wireless Network, FM Antenna supplied, Broadband service Wireless IP sharer PC, English, Connections