![Fixing the Indoor Unit in Place](/images/new-backgrounds/36051/3605129x1.webp)
COMPLETING THE INSTALLATION
Fixing the Indoor Unit in Place
ENGLISH
After checking for gas leaks in the system, insulate the pipe, hose and cables. Then place the indoor unit on the installation plate.
1To avoid condensation problems, place
2Wrap the refrigerant pipe and the drain hose in the rear of the indoor unit with the absorbent pad.
Wind the pipe and hose three times to the end of the indoor unit with the absorbent pad. (0.79 inch(20mm) interval)
3Wind the pipe, assembly cable and drain hose with insulation tape.
4Place the bundle (the pipe, assembly cable and drain hose) in the lower part of the indoor unit carefully so it doesn’t project from the rear of the indoor unit.
5Hook the indoor unit to the installation plate and move the unit to the right and left until it is securely in place.
6Wrap the rest of the pipe with vinyl tape.
7Attach the pipe to the wall using clamps (optional).
Installation plate