WARNING This indicates the possibility of serious injury or death.
The unit should be installed in accordance with the National Electrical regulations.
Ensure that the national safety code requirements have been followed for the main supply circuit. Ensure that a properly sized and connected ground wire is in place.
Check if the voltage and the frequency of the main power supply are those required for the unit to be installed and check the connection.
Make sure that properly sized disconnecting and safety switches are installed.
Do not attempt to repair, move, modify or reinstall the unit on your own. Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire.
Use the unit on a single outlet circuit. Do not share the power outlet with other appliances.
Obtain the consent by a qualified installer before connecting the unit to the power supply system.
CAUTION This indicates the possibility of serious injury or damage to environments when operated incorrectly.
Check the unit for damage that may have taken place during transportation and do not install or use damaged equipment.
All of the manufacturing and packaging material used for your new appliance are compatible with the environment and can be recycled.
Dispose of the packaging material in accordance with the local requirements.
This product is an air conditioning system and contains a coolant that must be recovered and disposed of in an appropriate way by qualified personnel. At the end of the life cycle, take it to a proper recycling or disposal center or return it to the dealer so that it can be disposed correctly.
Grounding the unit.
Do not connect the ground to a gas pipe, water pipe, lightning rod or telephone grounding. Defective grounding could cause electric shock.
Do not install the unit in a place where it is exposed to inflammable gas leakage. There is a risk of explosion.
Install a ground leakage breaker depending on the installation place (where it is humid). If not, it may cause electric shock.
Perform the drainage/piping work securely according to the installation manual.
If not, water could drop from the unit and household goods could get wet and damaged.
Fasten a flare nut with a torque wrench as specified in this installation manual.
When fastened too tight, a flare nut may break after a long period of time and cause refrigerant leakage.
To prevent injury when accidentally touching the indoor unit fan, install the indoor unit on a place higher than 8.2ft (2.5m).
The air conditioner must be installed according to the national electrical regulations.
The maximum input power & current is measured according to the IEC standard and the input power & current is measured according to the ISO standard.
