Safety precautions

After completing the installation, always carry out a functional test and provide the instructions on how to operate the air conditioner to the user.

Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to avoid the occurrence of fires, explosions or injuries.

To help prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5 m above the floor.

The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable to be installed in areas used for laundry.

Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that can be disassembled in conditions of complete safety either for people or things.

For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation won’t be considered in-warranty and charged to end user.

Power supply line, fuse or circuit breaker

Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in compliance with current local safety standards.

Always verify that a suitable grounding connection is available.

Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

Always verify that the cut-off and protection switches are suitably dimensioned.

Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring diagram included in the manual.

Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric specifications and with the instructions provided in the wiring scheme.

Always verify that all connections comply with the standards applicable to the installation of air conditioners.

Choosing the installation location

Indoor unit

For Wi-Fi Air-conditioner installation, select indoor unit location near to wireless router.

In case Wi-Fi signal strength weakened , Smart APP may be disconnected depending on the Wi-Fi signal strength.

Where airflow is not blocked.

Where cool air can be distributed throughout the room.

Install the refrigerant piping length and the height difference of both indoor and outdoor units as indicated in the installation diagram.

Wall that prevents vibration and is strong enough to hold the product weight.

Out of the direct sunlight .

1 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated).

As far away as possible from the fluorescent and incandescent lights (so that the remote controller can be operated well).

A place where the air filter can be replaced easily.

Don't install directly above electronics equipment as leaking water may cause damage if not serviced. (eg. Computers, TV, etc).

English-28

Maldives ET IB&IM_DB68-06219A-00_EN.indd 28

2016/5/16 10:26:44

Page 28
Image 28
Samsung AR12JSFPEWQNZE manual Choosing the installation location, Power supply line, fuse or circuit breaker, Indoor unit

AR07JSFPEWQNEU, AR09JSFPEWQNET, AR12JSFPEWQNZE, AR09JSFPEWQNZE, AR12JSFPEWQNET specifications

Samsung has long been a leader in innovative technologies, and their line of air conditioners, including the AR12JSFPEWQNET, AR09JSFPEWQNET, and AR07JSFPEWQNEU, exemplifies this dedication to quality and performance. These models are specifically designed to provide optimum comfort, energy efficiency, and advanced features, making them ideal for home and office environments.

One of the standout features of these Samsung air conditioners is their use of Digital Inverter Technology. This technology ensures that the compressor operates at variable speeds rather than turning on and off frequently. By maintaining a more consistent temperature, this not only enhances comfort but also significantly reduces energy consumption, leading to lower electricity bills. Additionally, the inverter technology contributes to a quieter operation, allowing users to enjoy a peaceful indoor environment.

Another notable technology is the Triple Protection Filter. This specialized filter system effectively captures airborne dust, allergens, and particulate matter, resulting in cleaner and healthier indoor air quality. The filter is also easy to clean and maintain, ensuring that the air conditioning system operates efficiently over time.

These air conditioning units also feature a sleek, modern design that can seamlessly blend into various interior styles. The compact size of the AR07JSFPEWQNEU makes it particularly suitable for smaller spaces, while the AR12JSFPEWQNET and AR09JSFPEWQNET models are designed to cater to larger rooms with more powerful cooling capabilities.

Samsung has also integrated user-friendly controls into these models, providing convenience and ease of operation. With features like the SmartThings app, users can monitor and control their air conditioning units remotely through their smartphones. This means that the air conditioning can be switched on before arriving home, ensuring a comfortable environment upon entering.

Energy efficiency is further enhanced with the Energy Saving Mode, which optimizes performance to reduce unnecessary power draw while maintaining comfort levels.

In conclusion, the Samsung AR12JSFPEWQNET, AR09JSFPEWQNET, and AR07JSFPEWQNEU air conditioners are equipped with cutting-edge technologies and features that make them exceptional choices for effective cooling. With their energy efficiency, advanced filtration systems, and smart controls, they provide both comfort and convenience, reflecting Samsung’s commitment to quality and innovation in home climate solutions.