Troubleshooting
PROBLEM | SOLUTION |
|
|
|
|
Air flow | • Check if you have selected Auto/Dry/ | mode. In |
adjustment is not | these modes, desired temperature is set to auto and you | |
working. | cannot adjust the temperature. |
|
|
|
|
Fan speed | • Check if you have selected Auto/Dry/Turbo/ |
|
adjustment is not | mode. In these mode, fan speed is set to Auto and you | |
working. | cannot adjust the fan speed. |
|
|
|
|
Remote | • Check if your batteries are depleted. |
|
controller is not | • Make sure nothing is blocking your remote controller | |
working. | sensor. |
|
•Check that there are strong lighting apparatus near the air conditioner. Strong light which comes from fluorescent bulbs or neon signs may interrupt the electric waves.
Timer function | • Check if you press the Set button on the remote controller |
does not set. | after you have set the time. |
|
|
The indicator | • Press the Power button or disconnect the power plug/ |
is blinking | switch off the auxiliary power switch. |
continuously. | If the indicator is still blinking, contact the service center. |
|
|
Odors permeate | • Check if the appliance is running in a smoky area. Ventilate |
in the room | the room or operate the air conditioner in Fan mode for |
during operation. | 1~2 hours. (We do not use smelly components in the air |
| conditioner.) |
|
|
Error is indicated. | • When an indoor unit indicator blinks, contact the nearest |
| service center. |
|
|
Noise is | • Depending on the status of the air conditioner usage, noise |
generated. | can be heard when refrigerant flow movement changes. It is |
| normal. |
|
|
Smoke is | • If may not be a fire but it can be a steam generated by the |
generated from | defrost operation from outdoor heat exchanger during Heat |
the outdoor unit. | mode in winter. |
|
|
Water is dropping | • Water may be generated because of the temperature |
from the outdoor | difference. It is normal. |
unit piping |
|
connection. |
|
|
|
|
|
Maldives ET
2016/5/16 10:26:44
