Installation

When fixing the indoor unit on a gypsum board

1Use stud finder to find out locations of the studs.

2Fix the plate hanger on two studs.

CAUTION

•If you fix the indoor unit on a gypsum board, use only specified anchor bolts on reference positions. Otherwise, the gypsum surrounding the joints may crumble over time and cause the screws

to be loosened and stripped. This may lead to physical injury or equipment damage.

•Search for other spots if there are less than two studs, or the distance between the studs are different from the plate hanger.

•Fix the installation plate without inclining to one side.

Step 2.11 Fixing the indoor unit to the installation plate

CAUTION

•Make sure that the pipe bundle does not move when you install the indoor unit onto the installation plate.

Step 2.12 Assembling the cover panel

1Lock the side hooks (D), then centre hooks (B). Then lock the bottom hooks (C) to engage the cover panel in place.

2Fasten the screw (A-), then assemble the cap screws (A-).

A B

A B

CD C

2

D

1

BB

C C

A

A

1

2

16English