If using a multi system, refer to the manual supplied with the outdoor unit.

Optional accessories

 

Insulated assembly pipe,

Insulated assembly pipe,

Ø 9.52 mm (1)

Ø 6.35 mm (1)

**09*******

 

**12*******

Insulated assembly pipe,

Insulated assembly pipe,

Ø 12.70 mm (1)

Ø 15.88 mm (1)

**18*******

**24*******

Pipe clamp B (3)

Pipe clamp A (3)

Drain Hose, 2 m long (1)

Foam Insulation (1)

Vinyl tape (2)

PE T3 foam tube insulation (1)

Putty100 g (1)

Drain plug (1)

M4 x 25 tapped screw (6)

Cement nail (6)

3-wire Power Cable (1)

3-wire Assembly Cable (1)

2-wire Assembly Cable (1)

 

Accessories in the outdoor unit package

Rubber leg (4)

NOTE

•A flare nut is attached to the end of each pipe of an evaporator or a service port. Use flare nuts when connecting the pipes.

•Wire assembly cables are optional. If they are not supplied, use standard cables.

•The drain plug and the rubber legs are included only when the air conditioner is supplied without assembly pipes.

•If these accessories are supplied, they are in the accessory package or outdoor unit package.

ToolsGeneral tools

•Vacuum pump

(Backward flowing prevention)

•Manifold gauge

•Stud finder

•Torque wrench

•Pipe cutter

•Reamer

•Pipe bender

•Spirit level

•Screwdriver

•Spanner

•Drill

•L-wrench

•Measuring tape

Tools for test operation

•Thermometer

•Resistance meter

•Electroscope

English 7

Installation