• The flare nuts are attached to the end of each pipe of an evaporator or a service port.

Use the nuts when connecting the pipes.

The wire assembly cable is optional. If it is not supplied, use the standard cable.

The drain plug and rubber leg are only included when the air conditioner is supplied without the assembly pipe as seen in the picture below.

Optional accessories

The following connection accessories are optional. If they are not supplied, you should obtain them before installing the air conditioner.

Insulated Assembly Pipe,

Insulated Assembly Pipe,

Insulated Assembly Pipe,

PE T3 Foam Tube

Vinyl Tapes (2)

Drain Hose,

Ø6.35 mm x 5 m (1) ✴✴12/18✴✴

Ø12.70 mm x 5 m (1)

Ø15.88 mm x 5 m (1) ✴✴24JFC✴✴

Insulation (1)

length 2 m (1)

Ø6.35 mm x 4 m (1) ✴✴24✴✴

✴✴12/18✴✴

Ø15.88 mm x 4 m (1) ✴✴24JFB✴✴

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

07stIn llan atio

Putty 100 g (1)

Pipe Clamps A (3)

Pipe Clamps B (3)

Cement Nails (6)

M4 x 25 Tapped

Screws (6)

 

 

 

 

4-wire

Assembly Cable (1) ✴✴12/18/24✴✴

• If these accessories are supplied, they will be in the accessory box.

Tools required for installation

General Tools

• Vacuum Pump(Backward flowing prevention)

• Manifold Gauge

• Stud Finder

• Torque Wrench

• Pipe Cutter

• Reamer

• Pipe Bender

• Spirit Level

• Screw Driver

• Spanner

• Drill

• L Wrench

• Measuring Tape

Tools for test operations

 

 

 

• Thermometer

• Resistance Meter

 

• Electroscope

 

Fixing the installation plate

You can select the direction of the drain hose depending on where you want to install the indoor unit. Therefore before fixing the installation plate to a wall or a window frame, you must determine the position of the 65 mm hole through which the cable, pipe and hose pass to connect the indoor unit to the outdoor unit.

When facing the wall, the pipe and cable can be connected from the:

• Right (A)

Direction of pipe

 

 

 

• Left (B)

 

 

• Underside_right (C)

A

B

• Rear_right or left (D)

D

D

 

C

 

You can install the refrigerant pipe in the left/right/bottom, or the rear side of the indoor unit.

• If changing the pipe direction from left to right, do not drastically bent it but slowly turn it in the opposite direction as shown. Otherwise, the pipe may be damaged in the process.

English-37

MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-05188A-00_UX.indd 37

2/17/2015 2:14:04 PM

Page 37
Image 37
Samsung AR24JQFNCWKXMG Fixing the installation plate, Optional accessories, Tools required for installation General Tools

AR18JQFSBWK/MG, AR12JRFNBWK/MG, AR24JRFNCWKXMG, AR24JRFNCWKNMG, AR24JRFNCWK/MG specifications

Samsung has consistently been a pioneer in the field of air conditioning technology, and their latest models, including the AR18JRFNEWKXMG, AR18JQFNEWKXMG, AR18JRFNEWKNMG, AR18JQSDBWK/MG, and AR24JQFNCWK/MG, exemplify this commitment to innovation and performance. Each of these units is equipped with advanced features designed to enhance comfort and efficiency in any setting.

One of the prominent characteristics of these models is the Digital Inverter technology. By adjusting the compressor's speed based on the cooling demand, this feature significantly reduces energy consumption compared to traditional models, leading to lower electricity bills while maintaining optimal room temperature. This energy efficiency is further bolstered by the units’ high Seasonal Energy Efficiency Ratio (SEER) ratings, ensuring that they operate smoothly even in extreme temperature conditions.

In addition to energy efficiency, these Samsung air conditioners are designed for convenience and ease of use. They come with a Smart Wi-Fi feature, allowing users to control their AC units remotely via a smartphone app. This capability not only provides comfort but also adds to the user-friendly experience by enabling programmable schedules and real-time monitoring of energy consumption.

Another noteworthy feature is the Air Purification System. Equipped with a triple filter system, including a PM 1.0 filter, these units capture and eliminate dust, allergens, and harmful particles from the air, resulting in improved indoor air quality. This is particularly beneficial for individuals with allergies or respiratory conditions.

Noise reduction is another area where these models shine. With near-silent operation, users can enjoy a peaceful environment without the disturbing sounds often associated with traditional air conditioning units. This is complemented by the sleek and modern design, which seamlessly fits into various home décors.

All of these features come together to create air conditioning solutions that not only provide exceptional cooling performance but also contribute to a sustainable lifestyle. Samsung’s dedication to customer-centric design and cutting-edge technology makes these models an excellent choice for anyone seeking reliable and efficient climate control solutions in their homes or offices.