Using the Auto Clean function

Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.

When the air conditioner is operating;

1.

Press the Settings button..

 

 

2.

Press the

,

or Settings button until (Clean) indicator starts to blink..

3.

Press the SET button to set the Auto clean function..

 

 

 

-- 3 seconds after setting Auto clean function, (Clean) indicator on the remote

 

controller display will disappear and Timer indicator (

) will turn on the indoor

 

unit display.. Auto clean function will be activated after the air conditioner stops

 

operating..

 

 

 

 

-- Duration of the Auto clean function can be different depending on the previous

 

operation mode used.

 

 

 

Auto(cool), Cool, Dry mode : 30 minutes.

 

 

 

Auto(heat), Heat, Fan mode :15 minutes.

 

 

Cancel

ffPress the Settings button Press the

,

or Settings button to

 

 

 

make the (Clean) indicator blink and press the SET button..

Indoor unit display

 

• When the operation mode is set during Auto clean function is activated,

 

 

 

the air conditioner will operate in chosen operation mode and the Auto

 

 

 

clean function will be re-activated when the operation stops.

•During the auto clean function, indoor fan will continue to run and air flow blade will remain open to expel ambient air.

•lighting in Auto clean mode.

SETTI 05NG

Setting the Beep sound

Beep sound from the indoor unit can be muted.

1. Press the Settings button..

2. Press the,or Settings button until (Beep) indicator starts to blink..

3.Press the SET button to mute the beep sound..

-- 3 seconds after setting Beep sound function, (Beep) indicator on the remote controller display will disappear and Beep sound function will begin.

English-25

MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-05188A-00_UX.indd 25

 

 

2/17/2015 2:13:52 PM