Evacuating the connected pipes

1.Connect each assembly pipe to the appropriate valve on the outdoor unit and tighten the flare nut.

2. Tighten the flare nut first with your hands, and then with a torque wrench, applying the following torque.

• Excessive torque can be cause of gas leakage.

3.Connect the charging hose of the low-pressure side of manifold gauge to a gas service port as seen in the picture.

4.Open the valve of the low pressure side of manifold gauge counterclockwise.

5.Evacuate the air in the connected pipes using the vacuum pump for about 15 minutes.

Make sure that pressure gauge shows -0.1 MPa(-76 cmHg) after about 10 minutes.

This procedure is very important to avoid a gas leak.

Close the valve of the low pressure side of manifold gauge clockwise.

Turn off the vacuum pump.

Check for 2 minutes if there is any pressure change.

Remove the hose of the low pressure side of manifold gauge.

6.Set a valve cork of liquid and gas service port to the open position.

Adding Refrigerant

Add refrigerant charge according to table below:

If you use a pipe longer than 4 m(24JFB) or

5 m(12/18/24JFC),A’g of refrigerant R-410A must be added for each extra meter.

If you use a pipe shorter than 4 m(24JFB) or

5 m(12/18/24JFC),The evacuating time is normal. Refer to the Service Manual for further details.

Outdoor unit

Indoor unit

 

Gas pipe side

 

Liquid pipe side

Outer

Torque

Diameter

N•m

kgf•cm

ø6.35 mm

14~18

140~180

ø9.52 mm

34~42

350~430

ø12.70 mm

49~61

500~620

ø15.88 mm

68~82

690~830

Manifold gauge

Valve

Gas service port <Low pressure>

 

Vacuum

Liquid service port

Pump

<High pressure>

(Backward flowing

 

prevention)

Model

A

 

 

12

10

 

 

18/24

20

 

 

07stIn llan atio

• The remaining air in the Refrigeration cycle, which contains moisture, may cause malfunction on the compressor.

• Always contact the service center or a professional installation agency for product installation.

English-49

MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-05188A-00_UX.indd 49

2/17/2015 2:14:21 PM

Page 49
Image 49
Samsung AR18JQFSBWK/MG manual Adding Refrigerant, English-49, If you use a pipe longer than 4 m24JFB or, Outer Torque

AR18JQFSBWK/MG, AR12JRFNBWK/MG, AR24JRFNCWKXMG, AR24JRFNCWKNMG, AR24JRFNCWK/MG specifications

Samsung has consistently been a pioneer in the field of air conditioning technology, and their latest models, including the AR18JRFNEWKXMG, AR18JQFNEWKXMG, AR18JRFNEWKNMG, AR18JQSDBWK/MG, and AR24JQFNCWK/MG, exemplify this commitment to innovation and performance. Each of these units is equipped with advanced features designed to enhance comfort and efficiency in any setting.

One of the prominent characteristics of these models is the Digital Inverter technology. By adjusting the compressor's speed based on the cooling demand, this feature significantly reduces energy consumption compared to traditional models, leading to lower electricity bills while maintaining optimal room temperature. This energy efficiency is further bolstered by the units’ high Seasonal Energy Efficiency Ratio (SEER) ratings, ensuring that they operate smoothly even in extreme temperature conditions.

In addition to energy efficiency, these Samsung air conditioners are designed for convenience and ease of use. They come with a Smart Wi-Fi feature, allowing users to control their AC units remotely via a smartphone app. This capability not only provides comfort but also adds to the user-friendly experience by enabling programmable schedules and real-time monitoring of energy consumption.

Another noteworthy feature is the Air Purification System. Equipped with a triple filter system, including a PM 1.0 filter, these units capture and eliminate dust, allergens, and harmful particles from the air, resulting in improved indoor air quality. This is particularly beneficial for individuals with allergies or respiratory conditions.

Noise reduction is another area where these models shine. With near-silent operation, users can enjoy a peaceful environment without the disturbing sounds often associated with traditional air conditioning units. This is complemented by the sleek and modern design, which seamlessly fits into various home décors.

All of these features come together to create air conditioning solutions that not only provide exceptional cooling performance but also contribute to a sustainable lifestyle. Samsung’s dedication to customer-centric design and cutting-edge technology makes these models an excellent choice for anyone seeking reliable and efficient climate control solutions in their homes or offices.