Samsung AR18HSFSEWKNMG, AR18HVFSEWKNMG, AR24HVFSEWKNMG Using the Auto clean function, Setting the Beep sound, English-25, When the air conditioner is operating;

Using the Auto clean function

Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.

When the air conditioner is operating;

1.	Press the Settings button..
2.	Press the		button until (Clean) indicator starts to blink..
3.	Press the SET button to set the Auto clean function..
	-- (Clean) indicator will be displayed on the remote controller display and Timer (
		) indicator will turn on the indoor unit display.. Auto clean function will be
	activated after the air conditioner stops operating..
	-- Duration of the Auto clean function can be different depending on the previous
	operation mode used.
	Auto(cool), Cool, Dry mode : 30 minutes.
	Auto(heat), Heat, Fan mode: 15 minutes.
Cancel		fFPress the Settings button again to make the (Clean) indicator blink and
			press the SET button..
Indoor unit display		• When the operation mode is set during Auto clean function is activated,
			the air conditioner will operate in chosen operation mode and the Auto

clean function will be re-activated when the operation stops.

•During the auto clean function, indoor fan will continue to run and air flow blade will remain open to expel ambient air.

•lighting in Auto clean mode.

ettiS 05ng s

Beep sound from the indoor unit can be muted.

1. Press the Settings button..

2. Press the button until (Beep) indicator starts to blink..

3. Press the SET button to mute the beep sound..

English-25