Smart Install mode

This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the functions. Execute Smart Install mode after installation.

1.Check the installation status of the air conditioner.

1)Check the power supply, service valve (if it's open), power cable of the indoor and outdoor unit and amount of additional07 refrigerant required for pipe extension.

2)Status of the indicator after supplying the power : Standby statusINSTALLATION

2.When the air conditioner is in standby status, use the remote controller to start the Smart Install mode.

1)Press the [SET], [Mode],[Power] button simultaneously for 4 seconds.

Smart Install mode can be operated only with the supplied remote controller.

During the Smart install mode procedure, remote controller cannot be operated.

Remote controller may be different (image/functions) depending on the model.

English-53

A3050 MG ModelIB&IM_DB68-04542A_HP_EN.indd53

 

 

2014/4/2 9:50:01