ffLocation of the hooks on the central part
Number and location of the hooks

Disassembling/Assembling the Cover panel for indoor unit installation

Removing the Cover panel (Before mounting the indoor unit)

The bottom panel fits the main body using the side, center, and bottom hooks as shown. Unlock the side hooks first, and then unlock the center and bottom hooks.

Check the location of the hooks before removing the cover panel.

Side hooks

Center hooks

Bottom hooks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Center hook

Bottom hook

 

 

 

 

 

 

 

 

For specific Hook location and quantity, please refer to cover panel with indicating arrows based on physical goods.

ffRemoving the hooks on the side

ffRemoving the hooks on the central part

② ①

Caution (fragile)

-- Gently press the both side of the cover panel inwards (①) and release the hooks on both sides(②).

Caution (fragile) -- Use both hands

-- Release each hook by pushing it up at an angle.

Assembling the Cover panel (After mounting the indoor unit)

To assemble the Cover panel, proceed in reverse order of disassembling.

Use both hands for assembling and be extra careful not to damage the pipes and drain hose.

Lock the side, center, and bottom hooks in this sequence. Tighten the bottom panel with the screws, and close the screw holes with their cap.

<Lock the side hook>

<Lock the bottom hook>

<Fasten the screw>

<Assemble the Cap screw>

English-40

 

A3050 MG ModelIB&IM_DB68-04542A_HP_EN.indd40

2014/4/2 9:49:54