HDMI
•If your TV is not compatible with compressed
•If your TV is not compatible with PCM sampling rates over 48kHz, the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off.
Dynamic Range Control
You can listen at low volumes but still hear dialog clearly.
This is only active when a Dolby Digital signal is detected.
•Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack.
•Off : Turn Dynamic Range Control off.
•On : Choose to listen to a movie at a lower volume without losing clarity of dialog.
Downmixing Mode
Select whether to downmix the
• Normal Stereo : Downmixes the
• Surround Compatible : Downmixes multi- channel audio into surround compatible stereo. Choose when connected to equipment that supports virtual surround functions such as Dolby Pro Logic.
DTS Neo:6
You can enjoy
•Off : Outputs a
•Cinema : Outputs
•Music : Outputs
✎NOTE
▪If you are using an HDMI receiver, this option is available when you set Digital Output setup to PCM.
HDMI Audio Output
Set the audio output method when a receiver is connected to the player.
• Auto : If the HDMI OUT 1 and HDMI OUT 2 terminals are connected to a TV and receiver respectively, you will hear audio through the device connected to HDMI OUT 2.
If the receiver is not connected to the player or turned off, you will hear audio through the TV speakers.
• HDMI 1 & HDMI 2 : You can listen to the audio from both the receiver and TV speakers.
Audio Sync
In some cases when the player is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, adjust the audio delay time to match the video signal.
•You can set the audio delay time between 0 msec and 200 msec.
Adjust it to the optimal setting.
✎NOTE
▪The audio delay time you specify may not be exact depending on the played content.
05 Setup
English 37
