Connections

Connecting to a TV with an Audio/Video cables and RF cable

1.Connect the RF cable as shown.

2.Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red) terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals of your TV.

3.Plug in the product and TV.4.Turn on the product and TV.To ANT INTo TV
RF cable

Audio/Video cable

 

Red White Yellow

To ANT INPUT

✎✎NOTE

`` The RF cable connection of this product sends only signals of TV. You must connect the Audio/Video cables to watch output from your product.

`` Noise may be generated if the audio cable is placed too close to the power cable.

`` If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 29~30)

`` The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV. `` If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the product.

Connections 04

English 25