Onkyo DV-SP502, DV-SP502E Basic Setup

19

Connecting the DV-SP502/DV-SP502E—Continued

The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In

this setup, stereo audio is played through the speakers in your TV.

• This player is equipped with copy protection technol-

ogy. Do not connect this player to your TV via a VCR

using AV cables, as the picture from this player will

not appear properly on your TV. (This player may also

not be compatible with some combination TV/VCRs

for the same reason; refer to the manufacturer for more

information.)

1. Connect the VIDEO OUTPUT and AUDIO OUT-

PUT ANALOG L/R jacks to a set of A/V inputs

on your TV.

Use the supplied AV cable (RCA), connecting the

red and white plugs to the audio outputs and the yel-

low plug to the video output. Make sure you match

up the left and right audio outputs with their corre-

sponding inputs for correct stereo sound.

See the following page if you want to use a compo-

nent or S Video cable for the video connection.

If you need another pair of stereo outputs (and don’t

need to use the multichannel analog outputs), you

can use the FRONT/D.MIX 1 or 2 AUDIO OUTPUT

jacks (page 22).

2. Connect the supplied AC power cord to the AC

INLET, then plug into a power outlet.

Notes:

• Before unplugging the player from the power outlet,

make sure you ﬁrst switch it into standby using either

the front panel STANDBY/ON button, or the remote

controller, and wait of the “GOOD BYE” message to

disappear from the player’s display.

• For the above reasons, do not plug this player into a

switched power supply found on some ampliﬁers and

AV receivers.

Basic Setup

ACINLET

REMOTE

CONTROL

SUPER AUDIO CD & DVD AUDIO/

VIDEO PLAYER

MODEL NO. DV-SP

502

RATING:

AC 120V 60Hz 11W

VIDEO

S VIDEO

R

L

SURR CENTER

12

FRONT/D. MIX

AUDIO OUTPUT

DIGITAL

SUB

WOOFER

OPTICAL

COAXIAL

PB

Y

PR

COMPONENT

VIDEOOUTPUT

L

R

ANALOG

INPUT

VIDEO IN

To power outlet

TV

AV cable

(Supplied)

Power cord

(Supplied)

Contents

Main E Super Audio CD & DVD Audio/Video player DV-SP502/ DV-SP502E Instruction Manual Contents Important Safety Instructions WARNING: CAUTION: WARNING AVIS Precautions DANGER: CAUTION: For U.S. model CAUTION: PrecautionsContinued For Canadian model NOTE: CAUTION: Modle pour les Canadien REMARQUE: PrecautionsContinued 5. Never Touch this Unitwith Wet Hands 6. Installing this Unit 7. Care 8. Handling Notes Table of Contents Basic Operation Overview Connections Getting Started and Setting up Introduction Highlights Video Audio Others Supplied Accessories Supported Discs Discs Made on Personal Computers CD-R/RW compatibility DVD-R/RW compatibility Disc Notes About WMA JPEG le compatibility PC-created disc compatibility Copyright Before Using the DV-SP502/DV-SP502E Installing the Batteries 3 1 2 Using the Remote Controller Front & Rear Panels A B C D Display 756 8 9A B IF G D Rear Panel 654 7 8321 A B C Rear Panel 1 6 87 95324 Page Page Connecting the DV-SP502/DV-SP502E Optical Digital Outputs RCA AV Connection Color Coding Before Making Any Connections AV Cables & Connectors Basic Setup Using S Video Using Component Video Using SCART (European model only) Connecting Your TV Switching the video output to interlace using the front panel controls Compatibility of this player with progressive-scan and high-denition TVs Connecting the Digital Output Connecting the Analog Output Connecting to an AV Receiver Connecting the Multichannel Analog Outputs Connecting -compatible Components Connecting the Power/Turning on the DV-SP502/ DV-SP502E 1 2 Getting Started Using the on-screen displays Setting up the player for your TV 1 2 1 2 3 4 Playing discs 1 2 3 4 Basic playback controls Resume and Last Memory DVD disc menus Video CD PBC menus Playing discs Scanning discs 1 2 3 1 2 3 Viewing a JPEG slideshow Browsing video content with the Disc Navigator 1 2 3 Browsing WMA, MP3 and JPEG les with the Disc Navigator 1 2 3 Looping a section of a disc 1 2 3 4 Using repeat play 1 2 Using random play 1 2 Creating a program list 1 3 2 4 5 1 2 3 4 Switching subtitles 1 Switching audio language/channel 1 Zooming the screen 2 Switching camera angles 1 Displaying disc information DivXvideo playback on the DV-SP502/DV-SP502E (not North American model) DivX video compatibility About DivX Playing DivX video DivX video playback on the DV-SP502/DV-SP502E (not North American model) Continued 1 2 4 3 1 2 1 2 3 DivX video playback on the DV-SP502/DV-SP502E (not North American model) Continued Playing DivXVOD content 1 2 3 Audio Settings and Video Adjust menus Audio DRC Audio Settings menu 1 2 1 2 3 Initial Settings menu Using the Initial Settings menu 1 2 Digital Audio Out settings Video Output settings Language settings Display settings Options settings Speakers settings About the audio output settings Parental Lock Registering a new password 1 2 3 Changing your password 1 2 3 Setting/changing the Parental Lock 1 2 3 Setting/changing the Country code 1 2 3 Country code list Default setting: STEREO Default setting: 2 Channel 1 2 3 4 Speaker Distance 1 2 3 4 Additional information Widescreen TV users Standard TV users Screen sizes and disc formats Setting the TV system (Not North American model) 1 1 2 Titles, chapters and tracks DVD-Video regions Selecting languages using the language code list 3 Language code list Using the Remote controller with Other Brands TVs (North American model only) Learning a pre-programming code Controlling a TV 1 2 Using the Remote controller with Other Brands TVs (North American model only)Continued Pre-programming Code List DivX Titles DivX TitlesContinued Note: Set the interleave to ve seconds or shorter. Glossary FAQ Troubleshooting DV-SP502/DV-SP502E Page TroubleshootingContinued Remote Controller Specications General Specications and features subject to change without notice. * 2 9 3 4 3 8 4 2 *