Wireless Network
You can setup a wireless network connection in four ways:
-- WPS(PIN)
When you configure the wireless network connection, any wireless network devices currently connected through the player or, if applicable, the player's current wired connection, will be disconnected.
ĞĞWireless - Automatic
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button. The player searches for and then displays a list of the available networks.
Network Settings
5.Select the desired network, and then press the v button.
6.On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button.
NOTEs
\\ To view the password as you enter it, use the arrow buttons to select Show Password on the right side, and then press v button.
7.When done, select Done and then press the v button. The player verifies the network connection and then connects to the network.
8.When verification is complete, select OK, and then press the v button.
NOTEs
\\ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.
ĞĞWireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
04 Settings
Select your network type.
Network type | Wireless |
Wireless network |
|
linksys3 |
|
solugen_edu#2 |
|
iptime23 |
|
solugen_edu#1 |
|
|
|
Refresh | WPS(PBC) |
You can connect your
1. | Follow the directions in Wireless - Automatic |
2. | through Step 5. |
The player searches for a network, and then | |
3. | displays the connection failed message. |
On the bottom of the screen, select IP | |
| Settings, and then press the v button. |
4. | The IP Settings screen appears. |
Select the IP Setting field, and then press the | |
5. | v button. |
Select Enter manually in the IP Setting field, | |
| and then press the v button. |
