Connections
Connecting to a Network Router
You can connect your product to your network router using one of the methods illustrated below.
To use the AllShare network functionality, you must connect your PC to your network as shown in the illustrations.
The connection can be wired or wireless.
Wired Network
Wireless Network
Wireless Router
Broadband
service
Or
NOTE
Broadband modem
(with integrated router)
Broadband service
Router
Broadband
service
Broadband
modem
NOTE
\\ If your wireless router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network.
\\ Set your wireless router to Infrastructure mode. Ad- hoc mode is not supported.
\\ The product supports only the following wireless security key protocols:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
\\ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.
\\ If you select the Pure
\\ Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.
\\ DSL users, please use a router to make a network connection.
\\ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).
14 English
