Samsung BDH6500 user manual Update Now, Update by USB

NOTE

\\ The upgrade is complete when the product turns off, and then turns on again by itself.

\\ Samsung Electronics shall takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software Update.

\\ If you want to cancel the upgrade while the upgrade software is downloading, press the v button.

\\ When a system upgrade is in progress, "UPDATE" is displayed on the front panel.

Update Now

You can use Update Now to update the software through your network connection or by using a USB flash drive. The network instructions are below. The USB flash drive instructions are on the next page.

1.Select Update Now, and then press the

vbutton.

The Update now pop-up appears.

2.The product searches on line for the latest software version.

3.If it finds a new version, the Update Request pop-up appears.

4.Select OK. The product upgrades the software, turns off, and then turns on automatically.

5.If you do not select OK or Cancel in one minute, the product stores the new upgrade software. You can upgrade the software later using Auto Update.

6.If you select Cancel, the product cancels the upgrade.

NOTE

\\ When the system upgrade is done, check the software details in the Product Information section of the Contact Samsung screen.

\\ Do not turn off the product during the Software Update. It may cause the product to malfunction.

Auto Update

You can set the Auto Update function so that the product downloads new upgrade software when it is in Auto Update mode.

In Auto Update mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.

1.Press the ▲▼ buttons to select Auto Update, and then press the v button.

2.Select On. Then the product will be updated automatically after power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.

NOTE

\\ To use the Auto Update Mode Upgrade function, your product must be connected to the Internet.

Update by USB

To upgrade by USB, follow these steps:

1.Visit www.samsung.com.

2.Click SUPPORT on the top right of the page.

3.Enter the product's model number into the search field. As you enter the model number, a drop down will display products that match the model number.

4.Left click your product's model number in the drop down list.

5.On the page that appears, scroll down to and then click Firmware Manuals & Downloads.

6.Click Firmware in the center of the page.

7.Click the ZIP button in the File column on the right side of the page.

8.Click Send in the first pop-up that appears. Click OK in the second pop-up to download and save the firmware file to your PC.

04 Settings

25 English