Samsung ME65B, BN4600098M01, ME75B user manual Position, PC Screen Adjustment, Resolution Select

4Screen Adjustment

4.3.2Position

Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen fit or Custom.

zTo use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen fit or Custom, follow these steps.

1	Press the	button to select Position. Press the [ ] button.
2	Press the	or button to move the picture up or down.

3Press the [ ] button.

zTo use the Position function after selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) or Custom, follow these steps.

1

2

3

Press the	button to select Position. Press the [	] button.
Press the	/ / / button to move the picture.

Press the [ ] button.

If you want to reset the picture to its original position, select Reset in the Position screen. The

picture will be set to its default position.

4.3.3PC Screen Adjustment

Available in PC mode only.

Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the center of screen.

Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Press the or button to adjust the Vertical Position. Press the or button to adjust the Horizontal Position.

Image Reset: Resets the image to the default settings.

4.3.4Resolution Select

If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu.

Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768

The Resolution Select option is only enabled when the input source is PC.

4 Screen Adjustment 110