26
English
Other Information

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
Since the necessary clam ps, screws, and string are not supplie d, please purchase these addi tionally.
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
Screw Specifications
For a 17 ~ 29 Inches LCD TV: M4
x
2. Remove the screws from the back center of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
nOTE
Verify all connections are prop erly secured. Periodical ly check
x
connections for any sign of fatigue for f ailure. If you have
any doubt about the security of your c onnections, contact a
professional installer.
Install the TV near to the wall so that it do es not fall backwards.
x
It is safe to connect the string so that the cla mps fixed on the
x
wall are equal to or lower than the clamps f ixed on the TV.
Untie the string before moving the TV.
x

Anti-theft Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
Please find a “
K” icon on the rear of the TV. A kensington slot is beside th e “K” icon.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such
as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end
of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
These are general instructio ns. For exact instructions, see the Us er
manual supplied with the locki ng device.
The locking device has to be purcha sed separately.
The location of the Kensington slot may be di fferent depending on the T V model.
Wall
1
<Optional>
BN68-02582B_Eng.indb 26 2010-08-31 �� 1:48:26