5
EN
Installing the Oven (Continued)

Connecting to the mains power supply

Electrical connections must be made as per the connection plate xed to the back of the
appliance by an electrical tter who must ensure that the appliance has been connected up in
accordance with tting instructions and local regulations.
Where the appliance is not connected to the mains electricity supply by a plug, an omni polar
cutout device (with a contacts gap of at least 3 mm) must be tted on the supply side of the
connection to meet safety requirements
) When power is connected, the electronics of the oven are initialised; this neutralizes
the lighting for a few seconds The electric cable (H05 RR-F or H05 VV-F, Min 1 5m,
1 5~2 5mm²) must be long enough for it to be connected to the built-in oven standing
on the oor in front of its unit.
Open the back cover of the oven at the bottom (using a at-bladed screwdriver)
and completely unscrew the connection screw and the cable clamp before tting
conducting wires into the appropriate terminals
The earth wire must be connected to the ( ) terminal of the oven
If the oven is connected to the power supply by a plug, this must remain accessible once the
oven has been tted.
We cannot accept any liability in the event of an accident resulting from non-existent or faulty
earthing

5

Live
Neutral
Earth
Connecting the oven to the power supply
(H05VV-F, H05RR-F, Min 1 5m, 1 5~2 5mm²)

6

min 5min 5

7

BT65FQBPST_XSA-00161N_EN.indd 5 2008-09-11  11:49:16