Installing the Hob

Important: Be sure the new appliance is installed and grounded only by qualified

EN

personnel.

 

Please observe this instruction. The warranty will not cover any damage that may

 

occur as a result of improper installation.

 

Technical data is provided at the end of this manual.

 

Regulations and compliance

This appliance meets the following standards:

EN 60 335 - 1 and EN 60 335 - 2 - 6, relating to the safety of electrical appliances for house- hold use and similar purposes;

EN 60350, or DIN 44546 / 44547 / 44548, relating to the operating features of electric cook- ers, hobs, ovens, and grills for household use;

EN 55014 - 2;

EN 55014;

EN 61000 - 3 - 2; and

EN 61000 - 3 - 3, relating to basic requirements for electromagnetic compatibility (EMC).

This appliance complies with the following EU Directives:

73 / 23 / EWG dated 19.02.1973 (Low Voltage Directive);

89 / 336 / EWG dated 03.05.1989 (EMC Directive including Amending Directive 92 / 31 / EWG); and

93 / 68 / EWG CE Labeling Directive.

Safety instructions for the installer

A device must be provided in the electrical installation that allows the appliance to be discon- nected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut - outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.

With respect to fire protection, this appliance corresponds to EN 60 335 - 2 - 6. This type of appliance may be installed with a high cupboard or wall on one side.

Drawers may not be fitted underneath the hob.

The installation must guarantee shock protection.

The kitchen unit in which the appliance is fitted must satisfy the stability requirements of DIN 68930.

For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.

On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout.

On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in place with a suitable artificial resin or mixed adhesive.

Ensure that the seal is correctly seated against the work surface without any gaps. Additional silicon sealant must not be applied; this would make removal more difficult when servicing.

The hob must be pressed out from below when removed.

5

C61RCCN_XAG-00060A-01_EN.indd 5

2007-09-18 ソタネト 12:11:26

Page 7
Image 7
Samsung C61RCCN/XEO, C61RCAST/XAG Installing the Hob, Regulations and compliance, Safety instructions for the installer

C61RCAST/XAG, C61RCCN/XEO specifications

Samsung has consistently made its mark in the world of home appliances, and the C61RCCN/XEO and C61RCAST/XAG models exemplify this commitment to quality and efficiency in kitchen technology. These built-in induction cooktops not only boast impressive designs but also come equipped with a range of advanced features that elevate the cooking experience.

At the heart of the C61RCCN/XEO and C61RCAST/XAG is Samsung's innovative induction technology. This system utilizes electromagnetic energy to directly heat cookware, resulting in rapid and precise temperature control. With induction cooking, achieving the perfect simmer or a quick boil is both efficient and easy, making these cooktops ideal for both novice cooks and experienced chefs.

One standout feature is the Flex Zone, which allows users to combine multiple cooking zones into one large, flexible area. This means that larger pots and pans can be accommodated with ease, providing the versatility needed for various cooking techniques such as sautéing, boiling, or frying. The flexibility enhances the cooktop's usability, making it suitable for a wide range of culinary tasks.

The user-friendly control panel is another impressive aspect of the C61RCCN/XEO and C61RCAST/XAG models. With intuitive touch controls, setting the desired temperature or adjusting cooking times becomes a straightforward process. Additionally, the cooktops offer multiple power levels and a timer function, allowing for even greater precision while cooking.

Safety is also a priority with these models. The auto shut-off feature provides peace of mind by turning off the cooktop when it detects that there has been no activity for a period of time. The residual heat indicator alerts users when the cooktop is still hot, helping to prevent accidental burns.

In terms of design, both cooktops boast a sleek and modern appearance that complements any kitchen aesthetic. Their frameless design allows for seamless integration into countertops, adding a touch of elegance to kitchen spaces. The glass ceramic surface also makes cleaning easy, as it is resistant to stains and scratches.

In summary, the Samsung C61RCCN/XEO and C61RCAST/XAG are advanced induction cooktops that feature innovative technologies like Flex Zone cooking, precise touch controls, and essential safety mechanisms. With their stylish design and user-friendly features, these cooktops are perfect for anyone looking to enhance their cooking experience while ensuring efficiency and safety in the kitchen.