
Chapter 3 Maintaining the Server
Installing or Replacing Server Components
Installing or Replacing Server Components
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Warning Class 1 laser product.
Statement 1008
Caution When handling server components, wear an ESD strap to avoid damage.
Tip You can press the Identification button on the front panel or rear panel to turn on a flashing Identification LED on the front and rear panels of the server. This allows you to locate the specific server that you are servicing when you go to the opposite side of the rack. You can also activate these LEDs remotely by using the Cisco IMC interface. See the “Status LEDs and Buttons” section on page
This section describes how to install and replace server components, and it includes the following topics:
•Replacing Hard Drives or Solid State Drives, page
•Replacing a Front Operations Panel Board, page
•Replacing a Drive Backplane, page
•Replacing Fan Modules, page
•Replacing DIMMs, page
•Replacing CPUs and Heatsinks, page
•Additional
•Replacing a PCIe Riser, page
•Replacing a PCIe Card, page
•Replacing an Internal USB Flash Drive, page
•Replacing the SuperCap Power Module (RAID Backup Unit), page
•Installing a Trusted Platform Module, page
•Replacing a SCU Upgrade ROM Module, page
•Replacing a Software RAID Key Module, page
•Replacing Power Supplies, page
|
| Cisco UCS C22 Server Installation and Service Guide |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
|