Cisco Systems OL-26646-01 manual Psu

Chapter 1 Overview

Figure 1-3shows the rear panel features of the server (identical for both versions of the server).

Figure 1-3 Rear Panel Features

1 2 3

PCIe 2	PCIe 1
PSU 1

4 5 6 7 8 9

302159

1	Power supply	6	Serial port (DB-9 connector)
2	PCIe slot 2 on riser 2	7	VGA video port (DB-15 connector)
	(half-height, half-length, x8 lane)
3	PCIe slot 1 on riser 1	8	10/100/1000 Base-T Ethernet dedicated
	(full-height, half-length, x16 lane,		management port
	supports NCSI)
4	Dual 1-Gb Base-T Ethernet ports (two)	9	Rear Identification button/LED
5	USB 2.0 ports (four)		–

Table 1-1lists the features of the server.

.

Table 1-1	Cisco UCS C22 Server Features
Chassis		One rack-unit (1RU) chassis.
Processors		One or two Intel Xeon E5-2400 Series processors.
Memory		The server provides 12 DIMM1 sockets on the motherboard.
		Note In a single-CPU configuration, only 6 DIMM slots are active.
Multi-bit error		This server supports multi-bit error protection.
protection
Baseboard		Pilot III BMC, running Cisco Integrated Management Controller (Cisco IMC)
management		firmware.
		Depending on your Cisco IMC settings, the Cisco IMC can be accessed through the
		1-Gb Ethernet dedicated management port, the dual 1-Gb Ethernet LOM ports, or a
		Cisco P81E virtual interface card.
Network and		The server provides these rear-panel connectors:
management I/O		•	One 10/100/1000 Base-T Ethernet dedicated management port
		• Two 1-Gb Base-T Ethernet ports
		• One RS-232 serial port
		• One VGA2 video connector
		• Four USB3 2.0 connectors

There are also two USB 2.0 ports on the front panel.

Cisco UCS C22 Server Installation and Service Guide

OL-26646-01 1-3