Cisco Systems OL-26646-01 manual 332668

Chapter 3 Maintaining the Server

Installing or Replacing Server Components

Step 3 Remove an old CPU:

a.Set the Pick-and-Place tool on the CPU in the socket, aligning the arrow on the tool with the registration mark on the socket (the small triangular mark). See Figure 3-15.

b.Press the top button on the tool to grasp the installed CPU.

c.Lift the tool and CPU straight up.

d.Press the top button on the tool to release the old CPU on an anti-static surface.

Figure 3-15 Removing or Inserting a CPU

1

2

332668

1

Arrow on tool

2

Registration mark on CPU socket

Step 4 Insert the new CPU into the Pick-and-Place tool:

a.Remove the new CPU from the packaging and place it on the pedestal that is included in the kit. Align the registration mark on the corner of the CPU with the arrow on the corner of the pedestal (see Figure 3-16).

b.Set the Pick-and-Place tool on the CPU pedestal, aligning the arrow on the tool with the arrow on the corner of the pedestal. Make sure that the tabs on the tool are fully seated in the slots on the pedestal.

c.Press the top button on the tool to grasp and lock in the CPU.

d.Lift the tool and CPU straight up off the pedestal.

	Cisco UCS C22 Server Installation and Service Guide
OL-26646-01		3-27