3-26
Cisco UCS C22 Server Installation and Service Guide
OL-26646-01
Chapter3 Maintainin g the Server
Installing or Replacing Server Components
Figure3-13 CPU Socket Latches
Step2 Remove a protective cap or an old CPU from the socket (if present):
•If you are removing an old CPU, skip to Step 3.
•If you are installing a new CPU to a socket that was shipped empty, the socket has a protective cap
that is intended to prevent bent contact pins. Use the tool as shown in Figure3-14 to grasp the
protective cap and then pivot to remove the cap.
Figure3-14 Protective Cap Removal Tool
1Heatsink screws (four) 4Hinged CPU cover plate
2Heatsink 5CPU
3CPU retaining latch
1
2
334645