Chapter 2 Installing the Server

Preparing for Server Installation

Rack Requirements

This section provides the requirements for the standard open racks.

The rack must be of the following type:

A standard 19-in. (48.3-cm) wide, four-post EIA rack, with mounting posts that conform to English universal hole spacing, per section 1 of ANSI/EIA-310-D-1992.

The rack post holes can be square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), #12-24 UNC, or #10-32 UNC when you use the supplied slide rails.

The minimum vertical rack space per server must be one RU, equal to 1.75 in. (44.45 mm).

Equipment Requirements

The slide rails supplied by Cisco Systems for this server do not require tools for installation. The inner rails (mounting brackets) are pre-attached to the sides of the server.

Slide Rail Adjustment Range

The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).

Cisco UCS C22 Server Installation and Service Guide

2-4

OL-26646-01

 

 

Page 22
Image 22
Cisco Systems OL-26646-01 manual Rack Requirements, Equipment Requirements, Slide Rail Adjustment Range