Samsung C670, C670D, C675, C675D Hard disk drive, Internal display panel

Internal display panel

Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the HW Setup section in Chapter 4, Utilities & Advanced Usage, for further information.

	Problem	Procedure
	No display	Press the FN + F5 hot keys to adjust the display
		priority, and to make sure it is not set for output to
		an external monitor.
	Markings appear on	These marks may have come from contact with the
	the computer's	keyboard and Touch Pad while the display panel
	display panel.	has been closed. You should try to remove the
		marks by gently wiping the display panel with a
		clean dry cloth or, if this fails, with a good quality
		LCD screen cleaner. In this latter instance you
		should always follow the instructions with the
		screen cleaner and always ensure you let the
		display panel dry properly before closing it.
Hard disk drive
	Problem	Procedure
	Computer does not	Check to see whether there is a disc in the optical
	boot from hard disk	disc drive - if so remove it and try to start the
	drive	computer again.
		If this has no effect, check the Boot Priority setting
		within the TOSHIBA HW Setup utility - please refer
		to the Boot Setting section in Chapter 4, Utilities &
		Advanced Usage for further information.
	Slow performance	The files on the hard disk drive may be fragmented -
		in this instance you should run the disk
		Defragmentation utility to check the condition of
		your files and the hard disk drive. Please refer to the
		operating system's documentation or online Help
		File for further information on operating and using
		the Defragmentation utility.
		As a last resort you should reformat the hard disk
		drive and then reload the operating system and all
		other files and data. If you are still unable to resolve
		the problem, contact TOSHIBA Support.

User’s Manual 6-8