To open the Corel Digital Studio Manual, press the F1 key when the Corel Digital Studio is launched.

Important information for use

Note the following limitations when you write Video DVD or Blu-ray disc movie, file convert or playback files.

Editing digital video

Log in with Administrator rights to use Corel Digital Studio.

Make sure that your computer is running on AC power when using Corel Digital Studio.

Operate the computer at Full Power. Do not use power-saving features.

While you are editing DVD, you can display preview. However, if another application is running. The preview might not display properly.

Corel Digital Studio cannot edit or play copy protected content.

Do not enter Sleep or Hibernation Mode while using Corel Digital Studio.

Do not operate Corel Digital Studio immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.

CD recorder, DVD-Audio, Video CD functions are not supported in this version.

Do not run software like a screen saver because it can put a heavy load on the CPU.

Do not support mp3 decode and encode.

DVD-VR format is not supported in this version.

Before recording the video to DVD or Blu-ray disc

When you record DVD disc or Blu-ray disc, please use only discs recommended by the Drive manufacturer.

Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD or Blu-ray disc.

Do not perform any of the following actions:

Operate the computer for any other function, including using a mouse or Touch Pad, or closing/opening the display panel.

Bump or cause vibration to the computer.

Use the Mode control button and Audio/Video control button to reproduce music or voice.

Open the DVD/BD drive.

Install, remove or connect external devices, including the following: memory media card, USB device, external display, optical digital devices.

Please verify your disc after recording important data.

Not support to output VCD and SVCD format.

Force eject disc.

User’s Manual

3-15