Some types and formats of DVD-R DL and DVD+R DL discs may be unreadable.DISC created in DVD-R DL format4 (Layer Jump Recording) cannot be read.When writing or rewritingPlease observe the following points while you write or rewrite data to a media:

Always copy data from the hard disk drive to the optical media - do not use the cut-and-paste function as the original data will be lost if there is a write error.

Do not perform any of the following actions:Change users in the Operating Systems.

Operate the computer for any other function, including such tasks as using a mouse or Touch Pad, or closing/opening the display panel.

Start a communication application such as a modem.Apply impact or vibration to the computer.

Install, remove or connect external devices, including such items as an memory media card, USB device, external monitor or an optical digital device.

Use the audio/video control button to reproduce music or voice.Open the optical disc drive.

Do not use shut down, log off, Sleep Mode or Hibernation Mode functions while writing or rewriting.

Make sure that the write/rewrite operation is completed before going into either Sleep Mode or Hibernation Mode (You can remove an optical media on the optical disc drive after writing is completed).

If the media is of poor quality, or is dirty or damaged, writing or rewriting errors may occur.

Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains or cars. In addition, do not use the computer on an unstable surface such as a stand.

Keep mobile phones and other wireless communication devices away from the computer.

TOSHIBA Disc Creator

Please be aware of the following limitations when you use the TOSHIBA Disc Creator:

DVD Video cannot be created using TOSHIBA Disc Creator.DVD Audio cannot be created using TOSHIBA Disc Creator.

You cannot use TOSHIBA Disc Creator's "Audio CD" function to record music to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW media.

User’s Manual

3-12